Mirtek

Chemitek MIRTEK

PRODUCT SUMMARY

Mirtek is an easy to apply concentrated product with antistatic and anti-adherent properties for application in CSP mirrors. It repels dust and reduces the adhesion of dust and dirt keeping the mirrors cleaner ad easier to clean.


This innovative coating reduces the loss of reflectivity by keeping the mirror cleaner with jet-wash or brush. It is an economic solution because it does not need rinsing when applying - it should be applied during normal cleaning operations.


It is a biodegradable and environmentally friendly solution, with pH neutral and solvent free - does not affect the mirror surface or any other component.

INDUSTRIES & APPLICATIONS

  • Protection and soiling mitigation for mirrors on CSP plants cleaned with distilled water
  • CSP plants cleaning companies
  • CSP plants with their own maintenance teams

AVAILABLE FORMATS

  • 1.3 Gal / 5L Drum

AVAILABLE CONCENTRATIONS

  • Mirtek 1000 - Dilution Ratio of 1:1000

FAQ'S

  • Do concentrated solar power plants (CSP) need to be cleaned?

    Yes, you should clean CSP plants because soiling and dust accumulation in reflectors for CSP plants decrease their reflectance and, consequently, the solar field efficiency.




  • Will Mirtek clean soiling and dust accumulation from my reflectors on my CSP plant?

    No, because Mirtek is not a cleaning solution, but rather an anti-soiling coating with antistatic and non-stick properties for all types of solar mirrors for CSP plants, and therefore repels dust and reduces the adhesion of dust and dirt to the reflectors, keeping the mirrors cleaner and easy to clean.


    According to results obtained in several studies, the most effective cleaning method for CSP plants is the one based on demineralized water and a brush, with an average efficiency of 98.8% in rainy periods and 97.2% in dry seasons.



  • Is it necessary to dilute the Mirtek before applying on my CSP mirrors?

    Yes, the Mirtek is a concentrated product. The dilution rate is 1kg of product Mirtek in 1000L of distilled or demineralized water.


    In case of doubt contact us.

  • After diluting the product, what are the steps to apply on my CSP mirrors?

    After dilution, clean the mirrors as you normally do. It is compatible with cleanings made with jet washing equipment or rotative brush.

  • What kind of application equipment is Mirtek compatible with?

    Mirtek can be applied with both jet wash and brush vehicles.




  • What is the shelf life of the product?

    The shelf life of the product is 6 months. After opening the package, the product is valid for 15 to 30 days. The product should be stored on dry and cool place and away from direct sunlight.



Share by: